Tubing is the entire arterial system of the hydraulic system is an important channel to pass the pressure, hydraulic lifting platform after long-term use, the hydraulic tubing will inevitably occur in the phenomenon of aging or aging, then the need to pay attention to the replacement of the problem?

http://www.atwwren.com/

1. tubing should be as short as possible, the best horizontal and vertical, little bend

2. In order to avoid tubing wrinkles, reduce the pressure loss, hydraulic lifting platform tubing assembly bending radius should be large enough, tubing overhang is appropriate to set the appropriate folder.

3. Tubing should be avoided as far as possible. Parallel pipe spacing is greater than 100 mm to prevent contact vibration, and easy to install pipe joints.

Tubing damage may lead to lifting power, fail to reach the rated height, or even a security risk, to timely repair or replacement, waiting for troubleshooting before the operation, which is not only responsible for their own, but also responsible for the safety of others performance.